Safety & Connectivity: Spirit CT800 Commercial Power Entry Module
Is your treadmill completely dead, or does the power flickering when you move the cord?
The Spirit CT800 is a commercial-grade powerhouse, but even the toughest machines rely on a single point of failure: the Power Entry Module. This component is the gateway for your 110V-120V power, housing the main power switch, the fuse holder, and the AC cord socket. Over time, frequent plugging and unplugging or electrical surges can cause the internal contacts to arc, melt, or snap. Our Genuine Spirit CT800 Power Entry Module is the factory-spec replacement designed to restore a safe, stable, and high-current connection for your commercial treadmill.
Integrated Electrical Safety Architecture
The CT800 module is more than just a plug; it’s a three-in-one safety system designed to protect the treadmill's expensive Motor Control Board (MCB).
Triple-Action Component: Combines the IEC C14 Power Inlet, a Heavy-Duty Rocker Switch, and a 12A-15A Fuse Drawer into a single, compact housing.
High-Inrush Switch: The rocker switch is engineered to handle the high "inrush" current of the 3.0 CHP motor without welding the contacts together—a common failure point in universal modules.
Secure Fuse Protection: Includes the specific slow-blow fuse holder required to protect the electronics from sudden voltage spikes while allowing for the natural amperage draw of a 12 MPH sprint.
Direct OEM Fitment: Pre-molded mounting flanges match the CT800’s steel frame base perfectly (SN 800845 / 800849 series), ensuring a flush, professional finish with no "wiggle."
Why Replace Your Power Module?
A loose or damaged power entry module is a significant fire hazard. If the AC cord feels loose in the socket, it creates resistance, which generates heat. This heat can eventually melt the plastic housing and potentially damage the internal wiring of your treadmill. If your CT800 trips the house breaker as soon as you flip the switch, or if it simply refuses to turn on, replacing this module is the standard first step in electrical troubleshooting.
The 15-Minute DIY Restoration
Replacing the module is a straightforward task that requires basic tools.
Safety First: UNPLUG THE TREADMILL from the wall.
Access the Rear: Remove the screws securing the module to the frame base.
The "One-for-One" Swap: Disconnect the internal spade connectors (Ground, Neutral, and Hot) from the old module and move them to the new one.
Secure: Snap the new module back into the frame and tighten the mounting screws.
Restore the heartbeat of your commercial Spirit treadmill.
[ITEMPRICE]